The Easy 7-Step Rubik's Cube Guide
Follow these 7 clear steps using the beginner Layer-by-Layer method. Use the interactive 3D visualizers to play move sequences at your own pace!
第1步:小雏菊与白色十字
目标:在底部拼出四周侧面颜色与中心完全对齐的白十字牢记核心规则 #1:中心块相对位置永远不变。黄色中心永远在白色中心的对面。
阶段A:拼出小雏菊
手持魔方,让黄色中心面朝上。将4个白色棱块移动到黄色中心四周,形成花心为黄、花瓣为白的小雏菊。
阶段B:翻转成底部白十字
- 观察顶层小雏菊的一片白色花瓣棱块,看其侧面的贴纸颜色。
- 转动顶层(U),让该侧面颜色与其正下方的侧面中心块颜色一致。
- 将该侧面旋转180度(F2),把白色花瓣翻转到正底部的白面。
- 对其余3片花瓣重复此动作,底部将形成完美的白十字!
3D 白十字效果展示
从一开始就将白十字朝下拼,这样视野开阔,能随时观察上方积木!
第2步:第一层角块归位
目标:彻底复原整个白色底层,且侧面颜色必须完全对齐接下来我们将4个白色角块填入底层,核心手法是极度好记的右手公式(上左下右)。
如何正确放入白色角块:
- 在顶层寻找任意一个带有白色贴纸的角块。
- 看该角块上的另外两种颜色(如红和蓝),转动顶层(U)将此角块移到红蓝中心块的正上方。
- 手持魔方,使该角块位于魔方的右手前上方位置。
- 重复右手公式(R U R' U')1到5次,直到白面朝下且侧面颜色完全对齐!
Understanding the cube's notation will speed up your learning. Check out our Move Notation Guide →
右手公式(上左下右)
重复这一4步组合动作,用来插入角块与置换位置。
切勿只看单面白面!必须核对每个白色角块侧面的颜色是否与其相邻中心块完全一致!
第3步:第二层中层棱块
目标:还原中间层的4个棱块在顶层寻找不含有黄色的棱块。
情况1:棱块需要向右推入
将棱块正面颜色与中心块对齐形成倒“T”字。若顶面颜色需要落入右侧中层插槽,执行公式:
情况2:棱块需要向左推入
若顶面颜色需要落入左侧中层插槽,执行镜面对称公式:
Move Edge Right
Drops the top edge piece down to the right middle layer.
Move Edge Left
Drops the top edge piece down to the left middle layer.
第4步:顶层黄色十字
目标:在顶面拼出黄色十字(不考虑角块颜色)With the first two layers complete, we now work on the top yellow layer. Hold the cube with yellow on top.
- Dot (Only yellow center)
- L-Shape (9 o'clock position)
- Horizontal Line (Left-to-right)
- Yellow Cross (Goal reached!)
Apply the magic sequence F R U R' U' F' to advance from Dot → L-Shape → Line → Yellow Cross!
Yellow Cross Formula
Turns Front face clockwise, performs Righty Trigger, then restores Front face.
Step 5: Permute Top Layer Edges
Goal: Match all 4 yellow edge side colors with side center piecesNow that we have a yellow cross, we align its side colors to match the center pieces of each side.
Turn the top face (U) to see how many yellow edges match their side center colors. Hold the cube so one matching edge is at the BACK and one is at the RIGHT side, then perform Sune algorithm.
Sune Algorithm (Swap Edges)
Swaps top layer edges while keeping yellow cross orientation intact.
Step 6: Position Top Layer Corners
Goal: Move all 4 yellow corner pieces into their correct corner slotsPut each corner piece in its correct corner slot. It doesn't matter if the yellow sticker faces up yet!
If one corner is in the correct position, hold it in the TOP-FRONT-RIGHT position and execute the Niklas algorithm:
Niklas Algorithm (Cycle Corners)
Cycles the remaining 3 corners until all 4 corners are in their correct slots.
Step 7: Orient Top Layer Corners (Solved!)
Goal: Flip yellow corners face-up to complete the entire Rubik's Cube!- Turn your entire cube UPSIDE DOWN so the White face is now on TOP and Yellow is on BOTTOM.
- Bring an unsolved corner to the BOTTOM-RIGHT position.
- Perform R U R' U' (Righty Trigger) 2 or 4 times until the yellow sticker faces DOWN.
- Turn ONLY the bottom face (D or D') to move the next unsolved corner into the bottom-right slot.
- Repeat until all corners face yellow down. Your Rubik's Cube is officially SOLVED! 🎉
恭喜!您成功还原了魔方!
多加练习以建立熟练的肌肉记忆,接下来挑战用计时器测试自己的手速吧!
如何操作3D交互魔方
支持鼠标拖动、手机触屏手势与360度全景观摩。
电脑端鼠标操作
- •点击并拖拽: 按住鼠标在任意空白处拖动即可360度全方位旋转视角。
- •点击魔方面: 直接点击任意贴纸即可旋转该面!
- •按键控制: 点击 R, L, U, D, F, B 按键旋转对应切层。
手机触控手势
- •单指划动: 在屏幕上划动即可旋转3D全景视角。
- •轻触色块: 点触任意切层贴纸或按钮即可执行旋转。
- •顺滑惯性: 划动手指松手后具有逼真的物理旋转阻尼效果。
打乱与视角复位
- •🔀 随机打乱: 点击“打乱”按钮自动生成一套打乱公式。
- •🎥 重置视角: 将3D观察视角恢复到默认角度。
- •实时渲染: 每一步转动贴纸颜色均实时同步更新。